Functionalities
- Multi genset synch & load share
- Mains synchronization
- Single genset parallel with mains
- AMF unit (uninterrupted transfer)
- ATS unit (uninterrupted transfer)
- Remote start controller
- Manual start controller
- Engine controller
- Remote display panel
- Long term data record on flash
- On-board Input&output extension
Communication
- Ethernet (10/100Mb)
- 4-band GPRS modem (optional)
- USB Host & USB Device
- RS-485 (2400-115200baud)
- RS-232 (2400-115200baud)
- Micro SD card slot
- J1939-CANBUS
- Geo-locating through GSM
- GPS support (USB & RS-232)
- Embedded web server
- Web monitoring & programming
- Internet Central Monitoring
- SMS message sending
- E-mail sending
- Free PC software: Rainbow Plus
- Modbus RTU & Modbus TCP/IP
- SNMP
Features
- • 4.3” 480x272pixels color LCD
- • Diesel and gas genset support
- • Supports up to 48 gensets
- • Automatic learning/self adjust
- • Direct governor & AVR control
- • Voltage and phase matching
- • kW & kVAr load sharing
- • Multiple topologies
- • 6xCT, true mains metering
- • True soft transfer in both ways
- • Peak Lopping / peak shaving
- • Mains de-coupling protection
- • R.O.C.O.F protection
- • Vector shift protection
- • Reverse power protection
- • Over/under freq. Protection
- • Over/under voltage protection
- • Smart load management
- • Smart genset sequencing
- • Run/stop priority support
- • Equal aging of gensets
- • Base load (power export)
- • Unmanaged distributed power export support
- • AVR & GOV droop support
- • Dead bus sensing
- • 400Hz operation support
• 400 event logs, full snapshot - • All parameters front panel
- editable
- • 3 level configuration password
- • 128×64 graphical LCD display
- • Downloadable languages
- • Waveform display of V & I
- • Harmonic analysis of V & I
- • Synchroscope & check synch
- • 12 configurable digital inputs
- • Inputs expandable to 44
- • 8 configurable digital outputs
- • Outputs expandable to 40
- • 7 configurable analog inputs
- • Both CANBUS-J1939 & MPU
- • 3 configurable service alarms
- • Multiple automatic exerciser
- • Weekly operation schedule
- • Dual mutual standby with equal aging of gensets
- • Manual “speed fine adjust” on selected ECUs
- • Automatic fuel pump control
- • Disable protections feature
- • Excess power protection
- • Overload IDMT protection
- • Load shedding, dummy load
- • Multiple load management
• Current unbalance protection - • Voltage unbalance protection
- • Fuel filling & fuel theft alarms
- • Battery back-up real time clock
- • Idle speed control
- • Battery charge run enabled
- • Combat mode support
- • Multiple nominal conditions
- • Contactor & MCB drive
- • 4 quadrant genset power counters
- • Mains power counters
- • Fuel filling counter
- • Fuel consumption counter
- • Modem & ethernet diagnostics
- • Configurable through USB,
- RS-485, Ethernet and GPRS
- • Free configuration program
- • Allows SMS controls
- • Ready for central monitoring ethernet & GPRS
- • Mobile genset support
- • Automatic GSM geo-location
- • GPS connectivity (USB&RS232)
- • Dynamic DNS support
- • Easy USB firmware upgrade
- • IP65 rating with standard gasket
Certificates
Downloads
- Product Brochure
- User Manual
- Product Presentation
- Parameter Setup and Monitoring Software: Rainbow Plus
Remote Monitoring
- Rainbow Scada Remote Monitoring Software
Accessories
- USB Cable
- Watertight Gasket
- Screw Type Plastic Bracket
- Spring Type Plastic Bracket
Reviews
There are no reviews yet.