WEB BASED D-500


The D-500 is a next generation genset control unit combining multi-functionality and wide communication possibilities together with a reliable and low cost design.

The unit complies and mostly exceeds world’s tightest safety, EMC, vibration and environmental standards for the industrial category.

Software features are complete with easy firmware upgrade through USB port.

The Windows based PC software allows monitoring and programming through USB, RS-485, RS-232, Ethernet and GPRS.

The Rainbow Scada web service allows monitoring and control of an unlimited number of gensets from a single central location.


Karşılaştır

Functionalities

  • AMF unit (uninterrupted transfer)
  • ATS unit (uninterrupted transfer)
  • Remote start controller
  • Manual start controller
  • Engine controller
  • Remote display panel
  • Harmonic analysis of V & I
  • Internal battery (optional)
  • Long term data record on flash
  • Input & output extension

Communications

  • Ethernet (10/100Mb)
  • 4-band GPRS modem (optional)
  • USB Host & USB Device
  • RS-485 (2400-115200baud)
  • RS-232 (2400-115200baud)
  • Micro SD card slot
  • J1939-CANBUS
  • Geo-locating through GSM
  • GPS support (USB & RS-232)
  • Embedded web server
  • Web monitoring & programming
  • Internet Central Monitoring
  • SMS message sending
  • E-mail sending
  • Free PC software: Rainbow Plus
  • Modbus RTU & Modbus TCP/IP
  • SNMP

Features

  • • Diesel and gas genset support
  • • 400Hz operation support
  • • 400 event logs, full snapshot
  • • All parameters front panel editable
  • • 3 level configuration password
  • • 128×64 graphical LCD display
  • • Downloadable languages
  • • Waveform display of V & I
  • • Harmonic analysis of V & I
  • • Synchroscope & check synch
  • • Allows closed transfers
  • • 16Amp MCB & GCB outputs
  • • 8 configurable digital inputs
  • • Inputs expandable to 40
  • • 8 configurable digital outputs
  • • Outputs expandable to 40
  • • 4 configurable analog inputs
  • • Both CANBUS-J1939 & MPU
  • • 3 configurable service alarms
    • Multiple automatic exerciser
  • • Weekly operation schedule
  • • Dual mutual standby with equal aging of  gensets
  • • Manual “speed fine adjust” on selected ECUs
  • • Automatic fuel pump control
  • • Disable protections feature
  • • Excess power protection
  • • Reverse power protection
  • • Overload IDMT protection
  • • Load shedding, dummy load
  • • Multiple load management
  • • Current unbalance protection
  • • Voltage unbalance protection
  • • Fuel filling & fuel theft alarms
  • • Battery back-up real time clock
  • • Idle speed control
  • • Battery charge run enabled
  • • Combat mode support
    • Multiple nominal conditions
  • • Contactor &  MCB drive
  • • 4 quadrant genset power counters
  • • Mains power counters
  • • Fuel filling counter
  • • Fuel consumption counter
  • • Modem & ethernet diagnostics
  • • Configurable through USB, RS-485, Ethernet  and GPRS
  • • Free configuration program
  • • Allows SMS controls
  • • Ready for central monitoring ethernet & GPRS
  • • Mobile genset support
  • • Automatic GSM geo-location
  • • GPS connectivity (USB&RS232)
  • • Dynamic DNS support
  • • Easy USB firmware upgrade
  • • IP65 rating with standard gasket

Certificates

Downloads

Remote Monitoring

Accessories

 

Reviews

There are no reviews yet.

Be the first to review “WEB BASED D-500”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.